Dr Josep Munuera Radiologist MD, Neuroradiologist EBNR, PhD. currently head of department (area of quality, innovation and research) of the Hospital & Radiology Department. He is In charge of coordinating all development projects that include imaging techniques. In addition to having a special dedication to the optimization of the 3 Tesla MRI system dedicated exclusively to Pediatric patients.

He is presently the Member of the 3D department (3D4H) leading the quality area and co-director of the postgraduate course at the Polytechnic University of Barcelona: Expert3D.

Arnau Valls Esteve is an engineer in the innovation department of the Sant Joan de DéuHospital in Barcelona, Leading national and European projects in digital medicine, coordinator of the 3D4H surgical planning unit of the same hospital and co-director of the postgraduate course Expert3D: Medical Image post-processing programme: 3D Printing and Artificial Intelligence of the Polytechnic University of Catalonia (UPC-BarcelonaTECH).

Find about the course : https://www.expert3d.eu/

Visit the 3D UNIT:

https://www.sjdhospitalbarcelona.org/en/3d-unit

Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM.

Website

https://ruchipathakkaul.com/

LinkedIn

www.linkedin.com/in/ruchipathakkaul

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Suzanne Winterflood is the Regional Coordinator, Central region at Makers Making Change, a program of Neil Squire Society, a non-profit organization. Makers Making Change uses 3D Printing to provide affordable assistive technology for people with disabilities. From a young age in England, UK Suzanne has supported people with disabilities. Since arriving in Winnipeg, Manitoba in 2007 she has worked in the technology sector ensuring equity for minority Canadians. Her role at MMC enables her to continue to support her local community by combining her knowledge, skills and experience.She Obtained Masters in Industrial & Organization Psychology at University of East London.She is currently the Interim President of Canadian Cerebral Palsy Sports Association, a Crisis Counsellor and is a Speaker at large conferences across Canada and Internationally. If you’d like to find out more about Makers Making Change visit www.makersmakingchange.com  REGISTER to be a part of our Guinness World Record attempt at  www.ATWorldRecord.com

Ruchi Pathak Kaul, is a TEDx & Professional Speaker. With an experience of +15 years in clinical practice & medical research she now helps medical/dental professionals overcome challenges in the understanding and implementation of 3D Printing & alike technologies. Technology has the potential to drastically enhance the delivery of present-day healthcare services. The problem is that only 10% of medical/dental professionals are familiar with the implementation and understanding of technology. She delivers talks, workshops and courses to help professionals understand and implement 3D Printing Technology with a low learning curve.

Website

https://ruchipathakkaul.com/

Book a 30-minute clarity call to connect on 3D Printing projects:

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Connect on LinkedIn

www.linkedin.com/in/ruchipathakkaul

Khalid Rafi is the Senior Lead for Additive Manufacturing Programs Development at ASTMInternational. He is responsible for various AM education and certification programs from ASTM with a vision to empower AM community to support wider AM adoption. Before joining ASTM,Rafi was the Technical Lead for Additive Manufacturing at Underwriter’s Laboratories (UL). He is having 20 years of industrial experience with over 10 years focusing primarily on additive manufacturing. Rafi also published 30 journal articles and did 50 over presentations at international conferences.

or

https://www.astm.org/.

Also, you can write to him directly at krafi@astm.org

Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM.

Website

https://ruchipathakkaul.com/

LinkedIn

https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

This week we welcome to the podcast Dr Krzysztof Dowgierd who is Head of the Cranio-facial Department of the Specialised Children's Hospital in Olsztyn University of Warmia, Mazury, School of Medicine, Department of Clinical Paediatrics in Poland.

Please visit their website - www.chirurgiaszczekowa.olsztyn.pl

Find Mr Dowgierd at https://www.linkedin.com/in/krzysztof-dowgierd-5b734364/

Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers.

Know your host:

Ruchi Pathak Kaul, is a TEDx & Professional Speaker. With an experience of +15 years in clinical practice & medical research she now helps medical/dental professionals overcome challenges in the understanding and implementation of 3D Printing & alike technologies. Technology has the potential to drastically enhance the delivery of present-day healthcare services. The problem is that only 10% of medical/dental professionals are familiar with the implementation and understanding of technology. She delivers talks, workshops and courses to help professionals understand and implement 3D Printing Technology with a low learning curve.

Website

https://ruchipathakkaul.com/

Book a 30-minute call to discuss on 3D Printing projects:

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

LinkedIn

https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/

Mr Pradeep Khanna is the Executive Director, Asia Pacific at VR AR Association and an alumini of Indian Institute of Technology, New Delhi.In this episode he discusses fundamentals of AR/VR and need of healthcare to adopt AR/VR for education & Training.

Find Mr Pradeep Khanna at:

         linkedin.com/in/pradeep-khanna-b445743       

Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers.

Know your host:

Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM.

Website

https://ruchipathakkaul.com/

LinkedIn

https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Surgeons in 3D Printing Podcast brings together medical professionals, engineers, entrepreneurs, researchers together and foster the spirit of collaboration.Today we have Alistair Bacchetti, Biomedical Student & President of student led non-profit organisation called eNable Handprints, Scotland,Uk. He talks about the vision and execution of the organisation.He also explains the teams and their duties along with the social service that team eNable Handprints delivers for the society.Listen to the entire episode to know the details.

Handprints e-NABLE Scotland website: https://www.handprintsenable.com/prosthetics

Follow Alistair on his LinkedIn profile: https://www.linkedin.com/in/alistair-bacchetti-3281191a9/

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Know your host:

Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM.

Website

https://ruchipathakkaul.com/

LinkedIn

https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

Surgeons in 3D Printing is a Podcast with the vision to trigger conversations, collaborations and knowledge transfer on 3D Printing and emerging technologies by surgeons, engineers, entrepreneurs and researchers.

Know your host:

Ruchi Pathak Kaul, is a TEDx & Professional Speaker, Author, Maxillofacial Surgeon,Podcaster & Entrepreneur. She is the Founder & Chairman of Reconstructive Healthcare Solutions (RHS) Pvt Ltd, India & Beyond Exponential ltd, UK. Ruchi brings to the table a rich Clinical & Research experience of more than 15 years in healthcare sector. She started as a dentist followed by maxillofacial surgery and then dwelled into research on Medical 3D Printing from AIIMS, New Delhi. She then found Reconstructive Healthcare Solutions Pvt ltd, a health-tech start-up. Ruchi is highly enterprising and is passionate about spreading 3D Printing and emerging technologies like AR/VR/XR across the surgical community for enhanced surgical experience and state of art patient care. Presently she is also the ambassador of Women in 3D Printing, New Delhi, State President of  Haryana for Science & Technology at WICCI, India and host of another Podcast Unstoppable in STEAM.

Website

https://ruchipathakkaul.com/

LinkedIn

https://www.linkedin.com/in/dr-ruchi-pathak-kaul-8b439236/

Book a 30 minute clarity call for your 3D Printing project with (RHS) to know more!

https://calendly.com/discovery-call-with-ruchi/virtualmeetup

This the weekly Question & Answer session of the podcast.We come up with Medical/Dental professionals to answer their queries each Thursday else put them in the form of questions for our weekly guests.

Subscribe the Podcast

Apple I  Google I  Amazon Music I Spotify I Gaana

To get in touch for Q& A Sessions

Email: surgeonsin3dprinting@gmail.com

CLICK HERE for the book!

Sponsors:

Reconstructive Healthcare Solutions Private Ltd.

Take the first step to your 3D Printing